≡MENU

Sub-Exposure Optimizer

Find the shortest sub-exposure where read noise stops mattering — so you're not wasting frames on noise you didn't need to add

Every sub-exposure carries two kinds of noise: read noise, a fixed cost your camera adds once per sub no matter how short or long it is, and sky-background shot noise, which grows with exposure time. Shoot subs too short and read noise dominates — you're adding it over and over for no real benefit. This tool finds the minimum sub length where sky noise has grown large enough that read noise stops being the thing holding your data back.

Enter your camera’s read noise and your sky’s background signal below to find your minimum sub-exposure.

Your Camera

The accepted range is 0.1 to 50 e⁻. Check your camera's spec sheet, or ZWO/QHY/manufacturer data for your gain setting.

Sky Background

The accepted range is 0.001 to 1,000 e⁻/px/s. Read this off your capture software's stats/histogram from a short test sub (SharpCap, N.I.N.A., APT all show it) — it depends on your sky, filter, and optics, so a guess won't be accurate.

Noise Target

3× is the usual sweet spot — by then, read noise adds very little to your total noise. Go conservative if your subs still look grainy after stacking.

Using Your Minimum Sub

  • It’s a floor, not a target — longer subs are fine and push read noise down further; the cost is more data lost when a sub is ruined by clouds, a satellite or a guiding glitch, and more saturated stars.
  • Shorter costs time — below the minimum, every sub adds its read noise again, so you need more total time for the same result.
  • Choosing 2×, 3× or 5× — 3× is the usual sweet spot; go 5× if stacked images still look grainy, or 2× when tracking or bright stars force shorter subs.
  • Re-measure the background — it changes with the sky, Moon and your filter; a narrowband filter lowers it a lot, which makes the minimum much longer.

How this is calculated

t_min = (k² × R²) ÷ B

R is your camera's read noise (e⁻), B is your sky's background signal rate (e⁻/pixel/second), and k is the noise-target multiple you selected (2×, 3×, or 5×). At t_min, sky shot noise (√(B×t_min)) has grown to exactly k×R — that's what the formula solves for.

This is one formula, not a full noise model: it only weighs read noise against sky-background shot noise, and doesn't account for dark current, other noise sources, guiding, or your target's own signal.