≡MENU

Critical Focus Zone Calculator

Find out how precisely you need to focus before stars start looking soft

The critical focus zone (CFZ) is the small range of focuser travel, centered on best focus, within which stars still look acceptably sharp. This tool uses the Conrad Rule of 2.44 (CFZ = 2.44 × wavelength × f-ratio²) to estimate that tolerance from your telescope's focal ratio and imaging wavelength. It's a formula, not a hard cutoff — star sharpness degrades gradually as you move outside this zone, not abruptly at its edge.

Enter your focal length and aperture (or f-ratio) below to calculate your critical focus zone.
Don't see your telescope or lens? Enter your specs manually.If you choose a preset, double-check that the values are accurate and match your telescope or lens.
The accepted range is 2 to 20,000 mm. Used to compute your f-ratio from aperture.
The accepted range is 1 to 2,000 mm.
Don't see your camera? Enter your specs manually.If you choose a preset, double-check that the values are accurate and match your camera.
Optional; the accepted range is 0.5 to 30 µm. Compares your critical focus zone to your sensor's pixel size.
you enteredfrom presetcalculatedtypical value

Understanding Your Results

F-Ratio Used is your telescope's focal length divided by its aperture (or whatever you entered directly) — the same f-ratio printed on most telescope spec sheets, e.g. “f/7.”

Critical Focus Zone (±) is how far your focuser can move away from perfect focus, in either direction, before stars start looking noticeably soft. Full CFZ Width is just that number doubled — the total amount of focuser travel between the “too far in” edge and the “too far out” edge.

The single biggest thing that changes this number is your f-ratio, squared: a telescope at f/10 has a zone 4× wider than the same telescope at f/5, and 4× narrower than one at f/20. Faster (lower f-ratio) telescopes are far more forgiving to focus by hand; slower ones reward — or require — more careful autofocus.

Worked example: a telescope at f/10, imaging in ordinary visible light (550 nm), has a critical focus zone of ±134.2 microns (a 268.4-micron total window). Enter focal length 1000mm and aperture 100mm above (or f-ratio 10 directly) to reproduce this exact figure and confirm the calculator above is working the way you'd expect.