Exposure & Integration Time Calculator
See your ideal sub-exposure length, how many subs you need, and how long the whole session should take
How long should each sub-exposure be, and how many do you need? Both come down to the same thing: once sky-background shot noise starts to dominate your camera's read noise, longer subs stop meaningfully improving your signal-to-noise ratio — so there's a sweet spot, not just “longer is always better.” Enter your setup and conditions once below to see that sweet spot, how many subs it takes to hit your target SNR, and how long the whole session should run. Just want that one noise-floor number, from only your read noise and background signal, without entering a full setup? Try the Sub-Exposure Optimizer instead.
Setup
Sky & Target
- 1 — Excellent dark sky
- 2 — Typical dark sky
- 3 — Rural sky
- 4 — Rural/suburban transition
- 5 — Suburban sky
- 6 — Bright suburban sky
- 7 — Suburban/urban transition
- 8 — City sky
- 9 — Inner-city sky
SNR vs. Integration Time
Sub-Length Sensitivity
How your total integration time changes if you use a fixed sub length instead of the recommended one, for the same target SNR.
Session Plan
What Changes Your Numbers
- Sky brightness — a darker sky (lower Bortle, higher SQM) lets each sub run longer and cuts the total time. A narrowband filter blocks most skyglow, so subs get much longer too.
- Moon — a bright Moon near your target brightens the sky (the full effect within 20°, fading to 20% of it at 100° or more), shortening subs and stretching the total. Save faint targets for darker nights, or aim well away from the Moon.
- A faster setup — a lower focal ratio puts more light on each pixel every second, so both the sub length and the total time drop.
- Your SNR goal — time grows with the square of the goal: doubling it takes four times as long (rounded up to whole subs).
How This Is Calculated
Your sky and target brightness (mag/arcsec²) are turned into electrons per pixel per second using your aperture and pixel scale. The recommended sub is where the sky’s own noise grows to 5× your read noise — past that, a longer sub barely helps. Subs needed is how many of those it takes to reach your SNR goal once each sub’s sky, dark-current and read noise are added up.
This page uses a quantum efficiency of 60 percent for every camera, including a camera preset you pick (the Guided Acquisition Wizard uses the quantum efficiency of your camera preset where a source lists it). It assumes a Moon brightening of 2.5 magnitudes at full illumination (scaled by illumination and separation), and a fixed narrowband offset (sky 3.5 magnitudes darker, target 1.0 magnitude fainter). Not included: guiding, clouds and star saturation, which can cap your subs sooner.