See if your guiding is tight enough for your pixel scale — or if it's the reason your stars aren't round
Autoguiding keeps your mount tracking accurately during long exposures, but no guiding
system is perfect — some residual error always remains, reported as a
total RMS error in arcseconds by guiding software like PHD2. Whether that
error actually shows up as elongated or trailing stars depends on your setup's
image scale (how much sky each pixel covers): the same guiding error that's
invisible on a wide, forgiving pixel scale can visibly trail stars on a tight, unforgiving
one. This tool compares the two so you can tell whether your guiding error is larger than your pixel scale — the case where guiding, not seeing or focus,
blurs stars.
Enter your focal length, pixel size, and guiding RMS error below to check your guiding against your pixel scale.
Custom / Manual
Don't see your telescope or lens? Enter your specs manually.If you choose a preset, double-check that the values are accurate and match your telescope or lens.
The accepted range is 2 to 20,000 mm. Your imaging scope's focal length, not your guide scope's.
Custom / Manual
Don't see your camera? Enter your specs manually.If you choose a preset, double-check that the values are accurate and match your camera.
The accepted range is 0.5 to 30 µm. Check your camera sensor's spec sheet if you're not sure.
The accepted range is 0.05 to 10 arcsec. The “Total RMS” figure most guiding software (e.g. PHD2) reports directly.
Gee Whiz Skies stores your theme, location and plan settings on your device. Accept All also loads Google Analytics, which sets cookies and sends your page visits to Google. Decline loads no analytics and sends nothing to Google.