≡MENU

Focal Reducer & Barlow Calculator

See exactly what a reducer or Barlow/extender changes, compared side by side with your native setup

A focal reducer shortens your telescope's effective focal length (widening the field of view and speeding up the f-ratio); a Barlow or extender lengthens it (narrowing the field of view and slowing the f-ratio down). Enter your native setup and either element's factor, and this tool shows focal length, f-ratio, field of view, pixel scale, and relative exposure time side by side — native vs. with the element.

Enter your telescope, reducer or Barlow, and camera below, then press Calculate to compare your setup before and after.

Telescope

Don't see your telescope? Enter your specs manually.If you choose a preset, double-check that the values are accurate and match your telescope.
The accepted range is 2 to 20,000 mm.
The accepted range is 1 to 2,000 mm. The native f-ratio is worked out from focal length ÷ aperture, so there’s no need to enter it.

Reducer/Barlow

Element type
The accepted range is 0.3 to 0.99. Reducer examples: 0.5 to 0.85.

Camera

Don't see your camera? Enter your specs manually.If you choose a preset, double-check that the values are accurate and match your camera.
Sensor input mode
The accepted range is 1 to 100 mm.
The accepted range is 1 to 100 mm.
Whole numbers; the accepted range is 100 to 30,000 px.
Whole numbers; the accepted range is 100 to 30,000 px.
you enteredfrom presetcalculatedtypical value