≡MENU

Field Rotation Calculator

See how fast your frame rotates on an alt-az mount, and how long you can expose before it shows

An alt-azimuth mount tracks a target across the sky by moving in altitude and azimuth, but it doesn't rotate the camera to match the sky's own apparent spin — so your frame slowly rotates around whatever you're pointed at during every exposure. How fast depends only on where you're pointed: your latitude, and the target's current altitude and azimuth. This tool calculates that rate, and — if you enter your setup — estimates how much it'll actually smear stars at the edge of your frame.

Enter your latitude, altitude, and azimuth below to see your field rotation rate.

Location & Target

The accepted range is −90 to 90°. Positive for northern hemisphere, negative for southern.
The accepted range is 0 to 90°.
The accepted range is 0 to 360°.
Height above the horizon, and compass direction — 0°=N, 90°=E, 180°=S, 270°=W. Most planetarium apps show both for whatever you're pointed at.

Estimate Star Trailing

Optional — see actual smear for your setup, not just the raw rate

Optional; the accepted range is 1 to 600 arcmin. Half your camera's diagonal field of view. Rotation shows up worst at the corners, farthest from center.
Optional; the accepted range is 0.001 to 3,600 s.

Why This Happens

Horizon Horizon Zenith — worst Low altitude — mildest

An alt-az mount tracks a target by nudging up/down and side-to-side, but it doesn't spin the camera to match the sky's own rotation. The result: your frame slowly rotates around the target during the exposure. It's mildest near the horizon, worst near the zenith, and swings fastest for targets that pass close overhead.

This calculator is not a derotation model.

If Rotation Is a Problem

  • Shoot shorter subs and stack more of them — each one shows less rotation.
  • Image the target earlier or later, while it's lower and farther from the zenith.
  • Add a field de-rotator, or switch to an equatorial mount or wedge, for long unguided subs.