≡MENU

Backfocus / Spacer Calculator

See if your imaging train's spacing matches what your reducer or flattener needs — and by how much

Most focal reducers and field flatteners are designed for a specific backfocus — the distance from the reducer/flattener's mounting flange to your camera's sensor. Get it wrong and no amount of focusing can fix the result: too little or too much spacing is a hidden cause of tilt (stars sharp in one corner, soft in the opposite one) and vignetting (dark corners). This tool adds up your imaging train's parts and compares the total to your reducer/flattener's required spec.

Enter your reducer/flattener’s required backfocus below, then list your imaging train’s components to check your spacing.
The accepted range is 1 to 300 mm. From your reducer or flattener manufacturer's spec sheet — not a number this tool can guess for you.
Add every spacer, adapter, filter wheel, and camera nosepiece between the reducer/flattener and your sensor. Example ranges, for reference only, not a fixed list to pick from — M42/T-thread adapters 4–10mm, filter wheels 16–25mm, and camera nosepieces 6–17mm. Check your own parts' spec sheets for exact numbers.
Each component’s thickness: Optional; the accepted range is 0 to 200 mm. Blank counts as 0.